Jump to content

  •  

CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.

Photo

Video - 3d printing a 2'' to 1.25'' converter

DIY 3d printing
  • Please log in to reply
No replies to this topic

#1 razidan

razidan

    Sputnik

  • -----
  • topic starter
  • Posts: 30
  • Joined: 17 May 2006
  • Loc: NY

Posted 09 April 2020 - 11:15 PM

So in my Nexstar 5'', the eyepiece tray has two slots for 2'' eyepieces. I don't use any 2'' eyepieces, but worse than that - when it's dark, it's very easy to place the eyepiece in the wrong hole, and watch it (or rather, hear it) falling 4 feet to the ground.
I give you my solution:

 

https://www.youtube....h?v=1JgXcH-ixx0

 

3d modeled in Fusion360 and printed with Prusa mk3.

STL file is attached for your use.


Edited by razidan, 10 April 2020 - 12:09 PM.

  • BoriSpider likes this


CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.


Recent Topics





Also tagged with one or more of these keywords: DIY, 3d printing



Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics