My Altitude Graduation Dial Came Off my mount. Any recommendations on how to reattach it correctly?
Altitude Graduation Dial Came Off
Posted 26 May 2020 - 06:22 PM
Since we have absolutely NO idea what mount you have, nor the type, how can we possibly help?
- emflocater likes this
Posted 27 May 2020 - 08:32 PM
Those are pictures with the Graduation Dial on probably not your actual mount. Pictures of the mount without the Graduation Dial off would help us help you on a fix.
Posted 27 May 2020 - 11:04 PM
Apologies, hopefully these two pics will assist in providing advice on how to fix this. https://photos.app.g...fDusQMvQnoCyfk9
Unfortunately, those are only glued into place. There is no chance that you will be able to glue them back exactly the same way they were.
FORTUNATELY, they probably were not glued into place using a high end level after putting the mount in a jig...in other words, they were probably not accurate to begin with. So, if you can kinda level the tripod, level the mount, then glue it back into place using a level, you'll be as accurate as it was to begin with.
Any kind of glue/epoxy/cement will work.
Posted 28 May 2020 - 12:45 PM
Thank you for your guidance and instruction Mr. Brad Shaw. I will follow your steps and fix it tonight.