Jump to content

  •  

CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.

Photo

Adaptor for Moravian OAG for the G3 CCDs

accessories
  • Please log in to reply
4 replies to this topic

#1 Manav

Manav

    Sputnik

  • -----
  • topic starter
  • Posts: 26
  • Joined: 20 Sep 2016
  • Loc: Sydney, NSW, Australia

Posted 13 August 2020 - 03:32 AM

Hi - I have a Moravian G3 16200 with internal filter wheel and G3 Moravian OAG.

 

I recently purchased a Helical focuser for the autoguider side of the Moravian G3 OAG to help finetune the focus.

 

However I’m not able to figure out what thread type is on the 1.25” nosepiece that connects the OAG to the guide camera? (see picture below)

 

I’m trying to connect the M42*0.75 female end of the helical focuser to the OAG and am looking for a suitable adaptor.

 

If anyone who owns a Moravian OAG can tell me that thread connection type that screws the 1.25” nosepiece into the OAG I can look for the appropriate adaptor.

 

Thanks in advance.

 

Regards

 

 

 

Attached Thumbnails

  • Untitled.png


#2 pyrasanth

pyrasanth

    Gemini

  • *****
  • Posts: 3,105
  • Joined: 08 Jan 2016

Posted 13 August 2020 - 02:10 PM

Why not contact Moravian support directly in Europe? They are very helpful


Edited by pyrasanth, 13 August 2020 - 02:11 PM.


#3 Manav

Manav

    Sputnik

  • -----
  • topic starter
  • Posts: 26
  • Joined: 20 Sep 2016
  • Loc: Sydney, NSW, Australia

Posted 13 August 2020 - 05:39 PM

Thanks! I sent them an email; I'll update here if I get a response.



#4 Manav

Manav

    Sputnik

  • -----
  • topic starter
  • Posts: 26
  • Joined: 20 Sep 2016
  • Loc: Sydney, NSW, Australia

Posted 25 August 2020 - 05:50 PM

Just confirming from Moravian team that the thread on the guiding camera port is metric M18x0.75.



#5 junluo168

junluo168

    Sputnik

  • *****
  • Posts: 25
  • Joined: 06 Mar 2019

Posted 11 September 2020 - 10:09 AM

Thanks! I sent them an email; I'll update here if I get a response.

Could you please let me know which email you used to contact the Moravian support team? I have a G3-16200 (Mark I) that stopped working. It could be a blown fuse...I sent an email to their general email but had not heard anything back after a week. Thanks!




CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.


Recent Topics





Also tagged with one or more of these keywords: accessories



Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics