Changing focal length on old PhD software
Posted 18 September 2020 - 09:58 PM
Posted 19 September 2020 - 06:18 PM
Are you sure you entered a Focal Length ?
From what I've just read of the original Stark Labs PHD, the Calibration discovers what focal length (specifically what image scale) you are using.
So unlike PHD2, no actual FL box to fill in.
Just do a Calibration with your new setup.
In PHD2 there are Profiles you set up for different cameras, mounts, and guidescopes.
So I would look through the initial menus of PHD1 for something similar if you're sure there is a FL setting.
Posted 20 September 2020 - 05:50 PM
Thanks for the tips!