Jump to content

  •  

CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.

Photo

ascom drivers

  • Please log in to reply
1 reply to this topic

#1 Szumi

Szumi

    Viking 1

  • -----
  • topic starter
  • Posts: 600
  • Joined: 01 Oct 2016
  • Loc: NLP, Michigan

Posted 24 September 2020 - 04:10 AM

I've been using the CPWI driver since I bought my mount in April.  This morning while trying to use pempro for the first time I tried the unified celestron driver for the first time as pempro didn't like CPWI.

 

CPWI puts my handcontrol in bootloader mode, rendering it useless for control and needing a power cycle to get it out of boot loader mode.  Quite annoying.  The unified driver didn't put it in boot loader mode so I could still use it while connected to pempro and phd2.

 

I didn't get to train pec as the smoke and clouds snuffed out my stars. 



#2 Lucky 777

Lucky 777

    Explorer 1

  • *****
  • Posts: 79
  • Joined: 18 Dec 2019
  • Loc: Carlisle PA USA

Posted 24 September 2020 - 04:15 PM

I noticed the exact same thing when plugging in to the bottom of the hh controller.  Interestingly, connecting CPWI via WiFi left the hh controller still accessible.




CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.


Recent Topics






Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics