Jump to content

  •  

CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.

Photo

Celestron AVX and ASIair plate solving issue

mount equipment Celestron astrophotography
  • Please log in to reply
No replies to this topic

#1 Cody Bechdol

Cody Bechdol

    Lift Off

  • -----
  • topic starter
  • Posts: 1
  • Joined: 30 Sep 2020

Posted 30 September 2020 - 09:16 AM

Good morning,
I have been trying to plate solve with the ASIair pro, asi294 mc pro, and my Celestron AVX mount. The issue I am having is that when the program wants to slew the mount on the RA axis 60 deg, it goes past 90 deg and I get a warning on the mounts hand controller that it has gone past it’s limit. The ASIair says it has only traveled 30ish degrees. I am not sure where to start with my troubleshooting. Can you point me in the right direction?

Thank you,
Cody Bechdol




CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.


Recent Topics





Also tagged with one or more of these keywords: mount, equipment, Celestron, astrophotography



Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics