Jump to content

  •  

CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.

Photo

Is it possible to install N.I.N.A. in a Raspberry Pi 4 with Astroberry?

astrophotography
  • Please log in to reply
2 replies to this topic

#1 pzampella

pzampella

    Sputnik

  • -----
  • topic starter
  • Posts: 30
  • Joined: 26 Apr 2020

Posted 19 October 2020 - 03:05 PM

I am thinking about buying a Raspberry Pi 4 and install Astroberry in it to be able to control my telescope without any wiring to my laptop. I have also been working using N.I.N.A., which I really like more than ATP, for example. However, I see that this software is not included among the ones pre-installed in Astroberry, so my question is: Is it possible to install it later somehow?



#2 tkottary

tkottary

    Viking 1

  • *****
  • Posts: 557
  • Joined: 06 Dec 2015
  • Loc: SunnyVale ,CA

Posted 19 October 2020 - 03:08 PM

no. Different architectures.


  • pzampella likes this

#3 TelescopeGreg

TelescopeGreg

    Vanguard

  • -----
  • Posts: 2,314
  • Joined: 16 Jul 2018
  • Loc: Auburn, California, USA

Posted 19 October 2020 - 05:41 PM

Short answer is no.

 

Longer answer is that the Pi is a fine platform for running your scope.  Check out alternatives such as CCDciel or Kstars / EKOS.  Both run well on Astroberry.  I'm using CCDciel.


  • giorgio_ne and pzampella like this


CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.


Recent Topics





Also tagged with one or more of these keywords: astrophotography



Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics