Jump to content

  •  

CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.

Photo

Part number for threaded power adapter on CGEM?

  • Please log in to reply
1 reply to this topic

#1 smcallis

smcallis

    Lift Off

  • -----
  • topic starter
  • Posts: 1
  • Joined: 07 Oct 2020

Posted 26 October 2020 - 09:53 PM

Does anyone know a part number for the threaded power port on the CGEM?  Working on putting a raspberry pi in a box with some power management and would like to connect it up properly.  I'd need the male and female parts.



#2 mdbradshaw

mdbradshaw

    Vendor - Axis Squared LLC

  • *****
  • Vendors
  • Posts: 259
  • Joined: 05 Feb 2019
  • Loc: Houston, TX

Posted 27 October 2020 - 10:53 PM

Switchcraft locking jack series, take your pick:

 

http://www.switchcra...aspx?Parent=606

http://www.switchcra....aspx?Parent=22

 

The CGEM will be a 2.1mm pin style, and straight, but your setup might work better with a right angle.

Basically, if you search on your favorite electric supplier "Switchcraft 721" you'll find something that works.

 

I have a pack of these cheapo knockoffs in front of me right now:

https://www.amazon.c...uct/B07LDZJD5J 


Edited by mdbradshaw, 27 October 2020 - 10:56 PM.



CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.


Recent Topics






Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics