Jump to content

  •  

CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.

Photo

CEM70 G - USB Unknown when connecting iGuider

  • Please log in to reply
3 replies to this topic

#1 rob77

rob77

    Vendor - FAST platesolver

  • -----
  • Vendors
  • topic starter
  • Posts: 979
  • Joined: 25 Feb 2012
  • Loc: Cuneo (Italy) / Belo Horizonte (Brazil)

Posted 10 January 2021 - 01:14 PM

Hi Everyone!!

I installed all the needed software for CEM70 G (firmware, commander, etc...).

 

When turning on the mount, iGuider can't connect. The error is the following (it's in Italian but you can easily figure out the translation).

 

image.png

 

Any clue?

 

Thanks!

Bests.

 

Roberto



#2 MikeHC8

MikeHC8

    Explorer 1

  • -----
  • Posts: 92
  • Joined: 09 Dec 2018
  • Loc: San Diego

Posted 10 January 2021 - 01:46 PM

I was going to update my firmware, and instead I sent it to Ioptron to update.  Much easer and I know it was be done.  They are very happy to work with you.



#3 rob77

rob77

    Vendor - FAST platesolver

  • -----
  • Vendors
  • topic starter
  • Posts: 979
  • Joined: 25 Feb 2012
  • Loc: Cuneo (Italy) / Belo Horizonte (Brazil)

Posted 10 January 2021 - 02:11 PM

Thanks.

 

I solved the issue BTW. I figured out that I haven't installed the FTDI driver (I thought I did it few weeks ago, but I didn't) !

 

Bests



#4 bemo47

bemo47

    Mariner 2

  • -----
  • Posts: 259
  • Joined: 08 Apr 2016
  • Loc: France

Posted 25 February 2021 - 01:28 PM

you should check the ascom driver for iguider here https://www.ioptron....cles.asp?ID=331




CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.


Recent Topics






Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics