Jump to content

  •  

CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.

Photo

What is this thread? About 22mm.

  • Please log in to reply
1 reply to this topic

#1 Dave92F1

Dave92F1

    Lift Off

  • -----
  • topic starter
  • Posts: 12
  • Joined: 20 Jan 2017
  • Loc: Boston USA

Posted 04 March 2021 - 05:44 PM

I bought a used Atik 414ex camera. There are some adapters that came in the box - I'm trying to figure out what one of them is.

 

See photos. The outer part of this seems to be a standard T/T2 thread (42mm or so) - that fits the Atik camera.

 

In the 1st photo you can see a few mm of male thread sticking out (toward the camera). That exactly fits a C-mount adapter, so I know what that is. (It's identical to the thread on the end of a C-mount lens.)

 

What's the inner part? In the photos you can see I'm measuring it. It's about 21.5 to 22 mm diameter (a bit more than you see on the calipers because I'm not measuring the thread depth). What does this fit?

Attached Thumbnails

  • PXL_20210304_223511637.jpg
  • PXL_20210304_223529539.jpg

Edited by Dave92F1, 04 March 2021 - 05:49 PM.


#2 Jinux

Jinux

    Ranger 4

  • *****
  • Posts: 352
  • Joined: 25 Jun 2007
  • Loc: San Jose, CA

Posted 04 March 2021 - 06:58 PM

Probably threaded to prevent glare? Just a guess.




CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.


Recent Topics






Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics