Jump to content

  •  

CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.

Photo

Guidescope Mounting Hardware

  • Please log in to reply
1 reply to this topic

#1 N0cash

N0cash

    Lift Off

  • -----
  • topic starter
  • Posts: 20
  • Joined: 07 Aug 2017

Posted 12 April 2021 - 04:38 PM

Hello CN

I have a WO Z61 APO riding on an iOptron CEM 25P. I also have a Stellarvue 50mm Guidescope. The Z61 came with only a single clamshell w/no mounting saddle on top. It does have 4 screws on the scope itself for mounting 2 shoes. The Stellarvue GS came with rings and rail (post 2017). My present setup utilizes a Losmandy side by side slab rail. I'm hoping to lighten my load by mounting the GS directly to my Z61. I just need to know the proper hardware. So far I haven't had luck getting advice from OPT or Stellarvue.

Thanks in advance.

Dave



#2 N0cash

N0cash

    Lift Off

  • -----
  • topic starter
  • Posts: 20
  • Joined: 07 Aug 2017

Posted 12 April 2021 - 06:45 PM

P.S. I'm just trying to save myself from buying the wrong hardware. I'm sure many here share that sentiment. We're not all wealthy.




CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.


Recent Topics






Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics