Jump to content

  •  

CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.

Photo

EQMOD communication errors

  • Please log in to reply
No replies to this topic

#1 jonathan007

jonathan007

    Lift Off

  • -----
  • topic starter
  • Posts: 19
  • Joined: 21 Jan 2021

Posted 16 April 2021 - 02:23 PM

please help
hi,
I have upgraded my PC from an old laptop 10 years old and now run a small box type PC Beelink i5 8th generation on windows 10 pro. Everything works OK until I connect my new camera ZWO ASI 533mc. After this EQMOD becomes unresponsive. the message center has all types of comm error like ED=16777216 ER=8977318 MSD=128 MSR=3. I have a heq5 and I am using my old usb to rs232 connector with the same driver. I use Cartes du ciel and connect via my mount hand controller set to PC direct mode. Any help or advice would be most welcome.I think I have some USB issues.


CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.


Recent Topics






Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics