Jump to content

  •  

CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.

Photo

c11 (CPC) feathertouch lost washer

  • Please log in to reply
1 reply to this topic

#1 kwma

kwma

    Lift Off

  • -----
  • topic starter
  • Posts: 2
  • Joined: 18 Feb 2008

Posted 24 June 2021 - 02:44 AM

Good morning everybody!

I have a minor problem with my feathertouch micro focuser (C11 cpc version  and latest models)

Could anybody inform me about the dimensions of the little washer that is located at the OTA's focusing rod screw? (not the main knurled one...i want the little washer that replace the original OTA's one)...

-outer diamater

-inner diameter

-width

I have several bronze and steel similar washers at my drawers, and i dont know which one is the correct.I have contact 3 times "Starlight instruments", but no response...

Have a nice day,

Kostas.


Edited by kwma, 24 June 2021 - 02:47 AM.


#2 kwma

kwma

    Lift Off

  • -----
  • topic starter
  • Posts: 2
  • Joined: 18 Feb 2008

Posted 06 July 2021 - 03:07 PM

Ok, Starlight Instruments responsed....

here  are the dimensions....(if anybody want them)

O.D.              0.37"

I.D                 0.22"

thickness    0.085"




CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.


Recent Topics






Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics