Jump to content

  •  

CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.

Photo

How to check bad block/sector of NAND on LS8 computerize mainboard?

Meade
  • Please log in to reply
No replies to this topic

#1 celestron8a

celestron8a

    Lift Off

  • -----
  • topic starter
  • Posts: 21
  • Joined: 19 Jun 2021

Posted 28 November 2021 - 09:20 PM

Hi 

I'm now suspect my NAND(Micron chip MT29F2G08AAC WP 2Gb) on the mainboard have a bad block or the factory marked bad block has been ereased, any one know how to check this NAND? Look like firmware update is complete in copying and validating files, but won't boot up the scope only show dim light on display.

 

Thanks


Edited by celestron8a, 28 November 2021 - 09:22 PM.



CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.


Recent Topics





Also tagged with one or more of these keywords: Meade



Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics