1 reply to this topic

[davidparks]

Beltless EAF and ASIAIR Mount for Redcat 71

 

https://www.thingive...m/thing:5217681

 

Gear Ring uses:
Qty 2: M4 Square Nuts
Qty 2: M4 x 20mm Socket Head Cap Screws

 

EAF mount is attached between the Redcat and Dovetail using:
Qty 2: M6 x 40mm Socket Head Cap Screws (35mm would also work)

You'll also want a right-angle USB2 cable for the EAF

 

EAF Shaft Gear = 21T Pinion Gear with 5mm bore

 

All available on Amazon, and maybe common hardware stores

I printed on Ender 3 V2 using standard PLA, raft, with supports everywhere.

 

I mounted ASIAIR Plus using a WO Saddle Plate for Vixen Dovetail.  (Designed to accommodate either horizontal or vertical mounting suitable for either Plus or Pro)

 

 

 

 

You can also find my earlier design using a GT2 6mm belt, and RC71 Fitted Flat Panel using Elumiglow on Thingiverse.

Edited by davidparks, 28 January 2022 - 01:00 AM.

[astro rocketeer]

Thank you David!! Looks great