Jump to content

  •  

CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.

Photo

Celestron Focus Motor Adapter

3d printing DIY SCT Equipment
  • Please log in to reply
2 replies to this topic

#1 Tommyent

Tommyent

    Explorer 1

  • *****
  • topic starter
  • Posts: 54
  • Joined: 16 Feb 2021
  • Loc: Chilliwack BC

Posted 29 June 2022 - 02:52 PM

I just finished an adapter to fit a celestron focus motor to my old C14, so I thought I'd post it here. The plastic sleeve that came with the motor doesn't fit with the 19mm shaft on the scope, so this is a direct replacement for the older shaft size. 

 

https://www.thingive...m/thing:5422111

 

Fits like a glove!

Attached Thumbnails

  • IMG_0724.jpeg
  • IMG_0725-min.jpeg

Edited by Tommyent, 29 June 2022 - 04:52 PM.

  • Skywatchr likes this

#2 Tommyent

Tommyent

    Explorer 1

  • *****
  • topic starter
  • Posts: 54
  • Joined: 16 Feb 2021
  • Loc: Chilliwack BC

Posted 29 June 2022 - 02:53 PM

And here it is on the scope

Attached Thumbnails

  • IMG_0726-min (1).jpeg


#3 Skywatchr

Skywatchr

    Gemini

  • *****
  • Posts: 3,098
  • Joined: 03 Jun 2006
  • Loc: North-Central Pa.

Posted 29 June 2022 - 04:49 PM

Awesome work!




CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.


Recent Topics





Also tagged with one or more of these keywords: 3d printing, DIY, SCT, Equipment



Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics