Jump to content

  •  

CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.

Photo

PixInsight 1.8.9-2 Build 1601 and BlurXterminator

  • Please log in to reply
8 replies to this topic

#1 Theschweiz

Theschweiz

    Lift Off

  • *****
  • topic starter
  • Posts: 6
  • Joined: 14 Oct 2020

Posted 02 March 2024 - 06:24 AM

Hello all, I've installed the PixInsight 1.8.9-2 Build 1601 update. When I went to use BlurXterminator I received the following error message. Has anyone else encountered this issue?

Attached Thumbnails

  • Screenshot 2024-03-01 192422.png


#2 Alexl007

Alexl007

    Lift Off

  • -----
  • Posts: 17
  • Joined: 10 Dec 2020
  • Loc: Sweden

Posted 02 March 2024 - 09:34 AM

Hello
I have something similar. My problem is that BXT, NXT, SXT have disappeared completely when I have upgraded the Pi to the latest one.



#3 Dean J.

Dean J.

    Vanguard

  • -----
  • Posts: 2,148
  • Joined: 13 Aug 2011
  • Loc: Above the grass.

Posted 02 March 2024 - 09:47 AM

Hello all, I've installed the PixInsight 1.8.9-2 Build 1601 update. When I went to use BlurXterminator I received the following error message. Has anyone else encountered this issue?

I believe that this is addressed on the RC Astro FAQ page - https://www.rc-astro.com/faq/

 

Hello
I have something similar. My problem is that BXT, NXT, SXT have disappeared completely when I have upgraded the Pi to the latest one.

This is addressed on the RC Astro FAQ page.  I just had to re-install the modules as per the first step. - https://www.rc-astro.com/faq/
 


  • psandelle likes this

#4 Theschweiz

Theschweiz

    Lift Off

  • *****
  • topic starter
  • Posts: 6
  • Joined: 14 Oct 2020

Posted 02 March 2024 - 04:54 PM

Perfect! Thank you for the help!



#5 BKMaynard

BKMaynard

    Viking 1

  • *****
  • Posts: 801
  • Joined: 21 Feb 2013
  • Loc: Maryville, Il. (st.louis area)

Posted 02 March 2024 - 05:29 PM

These updates suck



#6 GKA

GKA

    Messenger

  • -----
  • Posts: 454
  • Joined: 03 Jan 2019
  • Loc: South of Norway

Posted 03 March 2024 - 02:45 AM

I had no such problems , i upgraded to the latest version yesterday , and  blur , noise and starx was all there when finished , and they all work.


  • Juno18 likes this

#7 Juno18

Juno18

    Viking 1

  • *****
  • Posts: 820
  • Joined: 07 Dec 2018
  • Loc: Long Beach, Mississippi, USA

Posted 03 March 2024 - 07:30 AM

I had no such problems , i upgraded to the latest version yesterday , and  blur , noise and starx was all there when finished , and they all work.

Same experience for me. Just checked for updates like usual after an upgrade and everything was there.

Of course, I had to replace the tensorflow.dll file with the ‘Cuda’ version.


  • sheakev likes this

#8 StarfieldTSS

StarfieldTSS

    Lift Off

  • -----
  • Posts: 18
  • Joined: 26 Aug 2018

Posted 03 March 2024 - 10:53 AM

Before upgrading I backed up my tensorflow.dll file and then replaced it after the install.   If I remember right, when doing a fresh install PI will overwrite the version of tensorflow that's required to run CUDA.



#9 Wheeljack

Wheeljack

    Vostok 1

  • -----
  • Posts: 110
  • Joined: 07 Jun 2018
  • Loc: Norway

Posted 03 March 2024 - 11:18 AM

Same experience for me. Just checked for updates like usual after an upgrade and everything was there.

Of course, I had to replace the tensorflow.dll file with the ‘Cuda’ version.

Small tips. You can add this as a repository to automate that bit too:

https://www.rc-astro.com/TensorFlow/PixInsight/GPU

More info at RC-astro or a thread over at the Pixinsight Forums.


Edited by Wheeljack, 03 March 2024 - 11:18 AM.

  • Mbenj2405 likes this


CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.


Recent Topics






Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics