3 replies to this topic

[Studly]

Greetings,

 

Since my weather has been consistently crappy, I have spend the last two months going back over my previous reports. I have corrected what identification errors I could recognized, as well as applied new formatting to make them easier to read. I cannot guarantee there are no errors within, but they should be better than before.

 

These were all collected using a Celestron C6-N and the SA100 grating.

 

The link is: http://www.rspec-ast...ctraLibrary.zip

 

Any comments or suggestions are certainly welcome.

 

Thanks,

Tony

Edited by Studly, 15 March 2024 - 11:12 AM.

[JoeVanGeaux]

Studly, your link brings me to the RSpec page where there are 13 tabs.  What exactly is your link pointing to?

I don't have RSpec software or an SA100 and only daydream about having a setup to do some simple spec work in the future, so I don't exactly know how to handle your link.  Can you give me some guidance on how to further handle your link and what I am looking for, here?

Thanks.

Joe

[Studly]

Studly, your link brings me to the RSpec page where there are 13 tabs.  What exactly is your link pointing to?

I don't have RSpec software or an SA100 and only daydream about having a setup to do some simple spec work in the future, so I don't exactly know how to handle your link.  Can you give me some guidance on how to further handle your link and what I am looking for, here?

Thanks.

Joe

Sorry that is not working. The link should prompt you to save a .zip file. When it is extracted, the files should be there--17 .pdf files. I just tried it from here, and it appears to be working, so I'm not sure what is going on.

 

Try this link:

 

https://www.rspec-as...#SpectraLibrary

 

That is a link to the RSpec site with a link to the file.

 

Let me know if you still can't access it....

 

Tony

[JoeVanGeaux]

Thanks!  That second link worked just fine.

All the best!

Joe