Hi All, Not sure I have found the right forum but hopefully someone can point me in the right direction.
I was taking images with scope the other night of Bodes Galaxy.
When I loaded my image data into Deep Sky Stacker it stated that the Flats and Darks that I had taken were a size mismatch so it would not stack.
The image size on the ASI533MC is 3008x3008 the lights were the correct size but the Darks and Flats were smaller.
Can anyone please explain what I have done wrong?
Thanks
Image Size Wrong From ASI533MC Flats and Darks
Started by
Nightstar19
, Nov 03 2024 07:51 AM
Imaging Beginner Astrophotography CCD Software
2 replies to this topic
#1
Nightstar19
-
-
topic starter
- Posts: 2
- Joined: 01 Nov 2024
Lift Off
Posted 03 November 2024 - 07:51 AM
#2
bbasiaga
-
-
- Posts: 4,463
- Joined: 10 May 2006
Skylab
Posted 03 November 2024 - 08:02 AM
Did you maybe have Bin2 set by accident for some of the frames?
- gsaramet and Nightstar19 like this
#3
Nightstar19
-
-
topic starter
- Posts: 2
- Joined: 01 Nov 2024
Lift Off
Posted 03 November 2024 - 08:07 AM
Could well be now I think of it! I did put the them in Bin2 when I set them up in Autorun.
Might need to take them all again. Thanks
- bbasiaga likes this
CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.
Recent Topics
-
-
How to create master darks and flats in Astro Pixel Processor? Helpbigbangbaby - Today, 02:35 AM
Beginning Deep Sky Imaging
-
-
-
-
-
EdgeHD Weird 'Embossed' Rings on Lights, not Flats - Light Leak?lurkingtaco - Today, 12:59 AM
Cats & Casses
-
Jupiter 24/03/25 - 8" Dob and Samsung S21 - First proper image of Jupiter
gavinggu - Today, 12:34 AM
Major & Minor Planetary Imaging
-
Abell 31 / Sh2-290 - An Extremely Faint Planetary NebulaKGoodwin - Today, 12:25 AM
Experienced Deep Sky Imaging
-
