Hi there,
i have a quite old secondhand neq6 skywatcher mount, which i'd like to install belt transmission on.
Previous owner gave me belts and pulley (12:47) which i believe come from a quite old kit where they did not use belt idler pulleys already.
Since i'd prefer not to buy a new kit just for the idler plates, but i have the means to fabricate them, does anyone have dimensions to make them?
I mean both motor and idler plates compatible with neq6 skywatcher mount.
Thanks in advance
No replies to this topic
#1
dharmaschild
-
-
topic starter
- Posts: 14
- Joined: 22 Sep 2016
Lift Off
Posted 08 November 2024 - 04:26 AM
CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.
Recent Topics
-
Edge HD, OAG with field rotator - any users?jeffryculp - Today, 01:09 PM
Experienced Deep Sky Imaging
-
-
New to Solar – First Impressions (Visual + Imaging)
Aha63 - Today, 12:59 PM
Solar Observing and Imaging
-
-
-
-
New ASIAIR Meridian Flip Failure - Fails to SolveRu4scuba - Today, 12:24 PM
Experienced Deep Sky Imaging
-
-
Common beginning DSO objects, data gathering time?
Smksignals - Today, 11:47 AM
Beginning Deep Sky Imaging
-
