3 replies to this topic

[Kim2010]

Can someone point me where this is in SharpCap?

 

"..adjust the gain so the peak level (as shown by the level bars on the real-time histogram) is around 50-70% of maximum"

 

I can see the histogram in Live Stacking, but during planetary captures, I am not sure how to use this to follow the advice above from the FAQ.

[dcaponeii]

Can someone point me where this is in SharpCap?

 

"..adjust the gain so the peak level (as shown by the level bars on the real-time histogram) is around 50-70% of maximum"

 

I can see the histogram in Live Stacking, but during planetary captures, I am not sure how to use this to follow the advice above from the FAQ.

Your best option would be to use Firecapture.
 

[BKMaynard]

It’s the same histogram you’re using for live stacking

[Kim2010]

It’s the same histogram you’re using for live stacking

I'll take a look at this later. Thank you!