
Clip-in filter for Nikon APS-C size sensor
Started by
New_Hobby_Grandpop
, Mar 16 2025 11:24 PM
1 reply to this topic
#1
Posted 16 March 2025 - 11:24 PM
So i saw an earlier topic post from 2020 on this very subject but it was locked and I couldn't comment so I started it anew. I'm looking for a duo band light pollution filter for the Nikon D7200. I know Astronomics sells one for Nikon Full Frame sensor and the older topic from 2020 said astronomics would be putting out one for the APS-C sensor in the near future but I can't find one. Anyone know of one?
Thanks for any help, Clear Skies!
New_Hobby_Grandpop
Telescopes: iOptron 6-inch F4 imaging newtonian, 90mm mak-cass, ZWO 30mm f4 guide scope
Mount: Exos2-GT Pmc-eight goto mount
Cameras: main imaging-Nikon D7200, guide cam-ZWO Asi120mm mini.
Hardware: HP 19" Laptop, Intel i7, 32gb Ram, 256gb SSD
Software: APT, PHD2, CdC, ASCOM 7, DSS, GIMP
Thanks for any help, Clear Skies!
New_Hobby_Grandpop
Telescopes: iOptron 6-inch F4 imaging newtonian, 90mm mak-cass, ZWO 30mm f4 guide scope
Mount: Exos2-GT Pmc-eight goto mount
Cameras: main imaging-Nikon D7200, guide cam-ZWO Asi120mm mini.
Hardware: HP 19" Laptop, Intel i7, 32gb Ram, 256gb SSD
Software: APT, PHD2, CdC, ASCOM 7, DSS, GIMP
#2
Posted 17 March 2025 - 01:14 AM
I 3D printed (via paid service) clip-in holders for my D5500.
The holders accept standard 1.25" filters.
(you would have to buy mounted filters and "unmount" them i.e. disassemble and take the glass out)
https://www.cloudyni...ting-helped-me/
Edited by maxsid, 17 March 2025 - 01:15 AM.