Jump to content

  •  

CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.

Photo

Tak FC-100DF and ZWO ASI2400MC Pro

  • Please log in to reply
3 replies to this topic

#1 afrancis

afrancis

    Viking 1

  • *****
  • topic starter
  • Posts: 717
  • Joined: 26 Jan 2008
  • Loc: Middletown, Maryland

Posted 23 March 2025 - 02:55 PM

I have a local buyer interested in purchasing my Takahashi FC-100DF. I used it strictly for visual but his intended purpose would be AP. His camera is a ZWO ASI2400MC Pro. He's asking what adapters/flatteners he would need to make this work and I have no idea. He's not on CN so I offered to try to help. Any assistance would be greatly appreciated.

 

Thanks. 



#2 rollomonk

rollomonk

    Ranger 4

  • -----
  • Posts: 370
  • Joined: 28 Sep 2021

Posted 23 March 2025 - 03:55 PM

Here's a link to the Tak FC-35 reducer which is made for the Tak FC-100DF: https://takahashiame...35&_ss=e&_v=1.0

 

No, not cheap.

 

And here's the system chart for a Tak FC-100DF using an FC-35 reducer:  https://cdn.shopify....df?v=1657737288

 

It looks like the required back focus -- the distance from the reducer's threads and the camera's sensor -- is 72mm. So the buyer would have to make sure he uses adapters/extenders that produce this distance. The camera comes with multiple extenders/adapters but inexpensive ones are also available from resellers if he needs more.

 

I couldn't find a flattener made for it.


Edited by rollomonk, 23 March 2025 - 04:02 PM.


#3 afrancis

afrancis

    Viking 1

  • *****
  • topic starter
  • Posts: 717
  • Joined: 26 Jan 2008
  • Loc: Middletown, Maryland

Posted 24 March 2025 - 07:50 AM

Here's a link to the Tak FC-35 reducer which is made for the Tak FC-100DF: https://takahashiame...35&_ss=e&_v=1.0

 

No, not cheap.

 

And here's the system chart for a Tak FC-100DF using an FC-35 reducer:  https://cdn.shopify....df?v=1657737288

 

It looks like the required back focus -- the distance from the reducer's threads and the camera's sensor -- is 72mm. So the buyer would have to make sure he uses adapters/extenders that produce this distance. The camera comes with multiple extenders/adapters but inexpensive ones are also available from resellers if he needs more.

 

I couldn't find a flattener made for it.

Thank you for the response. While I understand the benefit of faster, at native f/7.4 is a reducer necessary? I'm assuming it is. Is there a less expensive brand reducer that would work?  Thanks again.



#4 rollomonk

rollomonk

    Ranger 4

  • -----
  • Posts: 370
  • Joined: 28 Sep 2021

Posted 24 March 2025 - 09:34 AM

Yes, either a reducer or a flattener is needed… otherwise the stars will be increasingly malformed away from the center. A camera pics up way more than what our eyes can see. I suggest you give a call to the good folks at Texas nautical (Takahashi America) because they know way more than what can be found on their website… there may be less expensive options. Good luck!


Edited by rollomonk, 24 March 2025 - 09:36 AM.

  • afrancis likes this


CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.


Recent Topics






Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics