Noticed lately that my pressure after being adjusted for viewing was leaking a bit as I had to re adjust more often during a session.
Looked in my bag of scope stuff and I had two sets of o rings marked 32 and 34.
I use the smaller on the front because it seems easier to rethread the cap on after a burb.
Ive got some of the High Vacuum Grease Lunt recommends in stock also.
Its an easy job and should solve the problem.
I got this scope refurbished from Lunt in 2019 and this is the 3rd set of o rings it’s gone thru.
Now I’m ready for a sunny day
Dan
Edited by bigdob24, 21 May 2025 - 07:48 PM.
